"CDS-6IP 3PoE" is a wireless transmitter for IP cameras that powers IP cameras and can be powered by a PoE switch itself
Highly efficient wireless transmission for IP cameras.
Thanks to the CAMSAT set of two CDS-6IP 3PoE units it is possible to create a wireless connection between the network recorder and many IP cameras with 60M bitrate streams. With the ability to work in a star topology (Point-to-MultiPoint) it is possible to connect multiple transmitters with one receiver. This significantly reduces installation costs. In the Point-to-Point transmission, the radio module will wirelessly connect to up to 16 IP cameras.
…with POE power supply for 3 IP cameras
3x PoE+ means reduced costs and faster installation. In each set, we will find a 24W power supply that will provide power for IP cameras with a total power of 15W. For larger cameras, just connect the 48V DC power supply with the appropriate current capacity – for example, ZS-48V/2A. The CDS-6IP 3PoE wireless system has PoE ports in PoE 802.3at/af standard with 30W/port power which gives up to 90W of current efficiency and allows the connection of very large PTZ IP cameras.
Pre-configured before shipping !!!
If the CDS-6IP-3Poe is ordered with a CDS-6IP-ECO we will preconfigure this and the CDS-6IP-ECO so that there is zero configuration for you to do.
Connect the CDS-6IP-3Poe to your cameras
Connect a CDS-6IP-ECO to your NVR.
So long as the two parts of the bridge have line of sight and are within 2km your bridge is setup and working.
A special system with protocols for the transmission of HD video and 4K
CDS-6IP=3POE is not a computer device to transmit Internet but transmitter for continuous and uninterrupted transmission of heavy HD images. Implemented special protocols audio / video provide broadcasts of all the frames HD and 4k with no delay in transmission. In addition to the simultaneous transmission of multiple images and sounds it also allows you to control PTZ cameras and the data transfer between the recorder and cameras.
CDS-6IPeco, using special communication protocols iCAMSAT-OS is able to provide a stable, reliable and efficient transmission.
The system provides ease of configuration, so it is recommended even for people with no experience in the field of IP CCTV. It has a very intuitive and simple software that contain only necessary to define functions. Just set only 2 necessary parameters (IP address and operating channel) to get a radio connection. In addition, the software includes an intuitive icon-type HELP which contain the necessary information on how to configure the device.
- stable high-quality transmission of 2MP -8MP IP CCTV in the 5,6 GHz band,
- 3POE ports for IP cameras,
- high power 500 mW radio (27 dBi),
- Point-to-Point and Point-to-Multipoint configuration,
- OFDM radio modulation,
- the maximum transmission speed of 300 Mbps radio,
- transmission coding 64/128 /152 bit,
- integrated dual antenna MIMO 2 x 14 dBi,
- precision tools for adjusting antennas and link testing,
- PoE 48V DC and separately 12V DC / 1 2W,
- RF power control,
- works with all video resolutions - from VGA (640 x 480) by HD (1080p) and up to 4K UHD.